|
Title: Mixing Epoxy Resin Post by: horlock07 on Saturday, October 22, 2016, 10:59:51 I need a very small amount of this to attach some magnets to wheel spokes, the kit I bought off eBay has had the card cut down to fit the envelope and half the instructions are missing, is the ratio of resin to hardener to mix normally 1:1 as that's what I am inclined to do?
Any suggestions? Title: Re: Mixing Epoxy Resin Post by: THE FLASH on Saturday, October 22, 2016, 11:13:48 The hardener is usually a lot less?
I would google it. Title: Re: Mixing Epoxy Resin Post by: Samdy Gray on Saturday, October 22, 2016, 11:27:36 What size is the hardener packet in comparison to the epoxy packet?
Mix them in that proportion. Title: Re: Post by: horlock07 on Saturday, October 22, 2016, 11:32:08 They are both the size of a small super glue tube, I literally only need about a finger tip size bit to attach two magnets to bike spokes. Had a look on Google and there seems to be no definitive answer! My own fault for buying cheap on eBay!
Title: Re: Mixing Epoxy Resin Post by: Honkytonk on Saturday, October 22, 2016, 16:37:07 If you've got more than you need then give it a test (I use cardboard boxes for testing epoxy consistency normally). It's normally 1:1, especially the cheap stuff. If that doesn't work then try a different ratio with small amounts.
Title: Re: Post by: horlock07 on Saturday, October 22, 2016, 18:49:09 Cheers, gone with 1:1 and seems to have stuck OK so will leave overnight and see how it looks before doing the other one, plus a few other things the wife has identified need bonding.
Title: Re: Mixing Epoxy Resin Post by: Samdy Gray on Saturday, October 22, 2016, 19:32:18 Should've just used some sugru.
Title: Re: Post by: Talk Talk on Saturday, October 22, 2016, 21:02:15 a few other things the wife has identified need bonding. You and her? Your teenage sons? Your adolescent daughter? Title: Re: Re: Post by: horlock07 on Saturday, October 22, 2016, 21:38:16 You and her? Your teenage sons? Your adolescent daughter? No, some antlers on a reindeer, as you ask....Title: Re: Mixing Epoxy Resin Post by: Ells on Sunday, October 23, 2016, 23:08:09 Should've just used some sugru. I fucking love sugru Title: Re: Re: Post by: Talk Talk on Sunday, October 23, 2016, 23:43:29 No, some antlers on a reindeer, as you ask.... How is the reindeer doing? Nearly ready for Christmas dinner? Title: Re: Mixing Epoxy Resin Post by: horlock07 on Monday, October 24, 2016, 09:22:26 How is the reindeer doing? Nearly ready for Christmas dinner? Reindeer is doing a treat, antlers now fully reattached and sat on the mantelpiece with its mate! |